INSTALL- APPLIANCE DESCRIPTION
The appliance is intended to heat cold water and supply it to a single draw-off
point. The appliance must only be installed with an open (non-pressurised) tap.
This open vented (non-pressurised) appliance is only suitable for oversink
installation.
Standard delivery
The following are delivered with the appliance:
Wall mounting bracket
INSALLATION - PREPARATIONS
Flush the water line thoroughly.
Water installation
No safety valve is required.
Taps/valves
Sealed unvented taps are not permitted.
Install an open vented tap.
Installation site
Material losses
Install the appliance in a room free from the risk of frost.
Store the dismantled appliance in a room free from the risk of frost,
as water residues remaining inside the appliance can freeze and cause
damage.
Material losses
Mount the appliance on the wall. The wall must have sufficient
load-bearing capacity.
Note
Ensure that the appliance is freely accessible for maintenance work.
Always install the appliance vertically and near the draw-off point.
09
