INSTALLATION
Products are manufactured are
in accordance to International
Standards; IEC 60335-1. These
appliances are safe and without
risk, provided they are installed,
used and maintained in good
working order in accordance
with our instructions and
recommendations.
Please read and understand
these instructions before
starting work and retain them
for later use.
DO NOT operate the appliance if
it is without water.
These heaters are of the opened
outlet type (0 rated pressure)
and are suitable for connection
to normal cold water mains
supplies up to a maximum of
0.7MPa (7bar).
DO NOT operate the appliance if:
• Water ceases to flow during
use.
• Water has entered inside the
unit because of an incorrectly
fitted cover.
• The appliance is damaged.
In all the above cases turn off
mains power and isolate water
supply.
ISOLATE the electrical and water
supplies before removing the
cover.
ISOLATE the electrical and water
supplies BEFORE proceeding
with installation or servicing.
CAUTION
It is recommended that persons
who may have difficulty
understanding or operating
the controls should not be left
unattended whilst using the
appliance. Special consideration
should be given to young
children and persons with
reduced physical, sensory, or
mental capabilities.
Only use designated entry points
for cable and pipe.
05
