32
• The packaging elements (plastic bags, staples, etc.) must not be left within reach of children as they represent
potential hazard sources.
• Packaging components must be disposed of according to the regulations in force in the country where the
machine in which the motor pump is integrated has been manufactured.
Plastic packaging must not be discarded in the environment.
• After unpacking the motor pump, make sure no parts are missing, all parts are in perfect condition and the
identification plate is in place and legible.
In case of any doubt, do not install the motor pump, but contact the Manufacturer.
• This manual must always accompany the machine in which the motor pump is integrated and made available
to the end user.
STANDARD FITTINGS
Make sure the purchased product consists of the following elements:
• motor pump;
• use and maintenance manual;
• declaration of incorporation.
In case of problems, contact the Manufacturer.
OPTIONAL ACCESSORIES
The standard motor pump equipment can be integrated with the following range of accessories:
• battery connection cable, including ON/OFF switch;
• suction and delivery fittings.
INSTALLATION
WARNING
• The
Skilled Technician
must abide by the installation instructions in this manual.
•
The machine in which the motor pump is integrated must be made in such a way as to ensure
conformity with the safety requirements indicated in the European Directives. This fact is guaranteed
by
markings and by the Declaration of Conformity of the Manufacturer of the machine in which
the motor pump is integrated.
• The motor pump can be installed in any position, however, when installing vertically maintain the head
pointing downwards in order to prevent liquid entering the electric motor in the event of leakage.
• The motor pump must be stably fastened, without pressing excessively on the rubber feet, as these act as
dampers and help to reduce noise and vibrations.
For the main formats used in the installation, refer to
Fig. 6
and
7.
APPLICATIONS
WARNING
• The motor pump must operate without exceeding the pressure limits as shown on the identification plate (4).
The pump applications must be made following good mechanical engineering practices. The Manufacturer’s
Summary of Contents for EF 1200
