12
5.2 Touch panel operating
uXcel charger series monitors and controls with 7 inches high-performance screen. The
inside processor of touch panel adopts Cortex-A8 which has quick reaction and high
sensitivity.
The main work of touch panel monitor
(a) Touch panel monitors the operating charging power supply and its present value of
working parameters. Then real-time displaying (mainly includes the present voltage value,
current value, ampere hour, working stage, working mode, charging curve, operated time
value in present stage and the present working condition) and real-time giving an alarm
when it out of order (displaying by screen and judging whether the equipment misfunctions
or not )
(b) Real-time operating and controlling the equipment. The operations to charging power
mainly are operating, pausing, recovering, stopping, leapfrogging(GOTO stage) and
temperature compensating etc.
(c) Including the monitoring function, touch panel also could compile procedure.
Below is the specific operating and displaying screen
1). Start-up screen
When the charger is turned on, enter a friendly welcome screen. as showed in the figure 5-2.
Figure 5-2
2). Charging state screen
From the charging state screen, operator could start or stop the charger and see the
parameters of the present charging step, charging voltage, charging current, charging time and
charging capacity etc. as showed in the figure 5-3
