Everet EVP-220L, User Manual

Page: 11 / 21

8
SERIAL PORT CONFIGURATION
VISCA PROTOCOL
Part1 Camera Return Command
Ack/Completion Message
Command Packet Note
ACK z0 41 FF Returned when the command is accepted.
Completion z0 51 FF Returned when the command has been executed.
z = camera 8
Part 2 Camera Control Command
Command Function Command Packet Note
AddressSet Broadcast 88 30 01 FF Address setting
IF_Clear Broadcast 88 01 00 01 FF I/F Clear
CommandCancel 8x 21 FF
CAM_Power
On 8x 01 04 00 02 FF
Power ON/OFF
Off 8x 01 04 00 03 FF
CAM_Zoom
Stop 8x 01 04 07 00 FF
Tele(Standard) 8x 01 04 07 02 FF
Wide(Standard) 8x 01 04 07 03 FF
Tele(Variable) 8x 01 04 07 2p FF
p = 0(low)~7(high)
Wide(Variable) 8x 01 04 07 3p FF
Direct 8x 01 04 47 0p 0q 0r 0s FF
pqrs: Zoom Position (0(wide)
~0x4000(tele))
CAM_DZoom
ON 8x 01 04 06 02 FF
OFF 8x 01 04 06 03 FF
CAM_Focus Stop 8x 01 04 08 00 FF
Parameter Value Parameter Value
Baud rate 2400/4800/9600/115200 Stop Bit 1bit
Start Bit 1 bit Check Bit None
Date Bit 8 bit
Error Messages
Command
Packet
Note
Syntax Error z0 60 02 FF
Returned when the command format is different or when a command with
illegal command parameters is accepted.
Command Not
Executable
z0 61 41 FF
Returned when a command cannot be executed due to current conditions.
For example, when commands controlling the focus manually are received
during auto focus.