background image

25

CONDENSER COIL MAINTENANCE

Failure to maintain a clean condenser coil will eventually result in compressor failure and product loss. 

Mechanical failures due to a lack of or improper maintenance are not covered under warranty. 

Keeping the condenser coil clean will maximize energy savings. 

Cleaning of the condenser coil is part of regular maintenance and is not covered under warranty.

CONDENSER COIL CLEANING PROCEDURE

Please use the following steps to clean the condenser coil. If you have any questions regarding this 

procedure, please call the Everest customer service department at (800) 444-6285.

1. Unplug the unit from the wall.

2. Remove the ventilation grill located at the left side or back of the unit, depending on the model. 

    The grill is secured by Philips head screws.

3. Slide out the condensing unit enough so that the condenser coil can be cleaned. The condensing unit 

    is on a tray which can be slid out by removing the Philips head screws securing the slide out tray 

    to the unit.

4. Clean the condenser coil using a vacuum or brush. The fins of the condenser coil should only be cleaned 

    and swept in the direction of the fins, which is up and down. Be careful not to bend the fins.

5. In some instances, the condenser coil may require professional cleaning due to a buildup of grease and 

    dust. In this case, contact a local refrigeration company to take care of this for you.

6. Push the slide-out condenser tray fully home once cleaning is completed.

7. Secure the condenser tray using the Philips head screws that were removed in step 3.

8. Before securing the ventilation grill back onto the unit, be sure that all tools have been removed from 

    the condenser area and that nothing will obstruct the motion of the condenser fan blade.

9.  Replace the ventilation grill onto the back of the unit using the Philips head screws removed in step 2.

Critical Information

Critical Information

REFRIGERATION

The warranty card below must be submitted to Everest within thirty (30) days of purchase.

WARRANTY REGISTRATION CARD

Business Name :                                                                              Telephone : (                 )

Address :

City :                                                       State :                                                              Zip :

Place of Purchase :                                                        Date Purchased :                             Date Installed :

Model No :                                                                          Cabinet Serial No :

3 YEAR PARTS and LABOR WARRANTY

(

Applicable to units purchased after July 1, 2014.)

5 YEAR COMPRESSOR WARRANTY

Name  of Business Owner :                                                                         Date :

Signature of Business Owner :

Summary of Contents for ebd1





























Reviews: