background image

18

Warranty Information 

You may register online at 

www.EVERESTref.com

 or use your smart phone to scan the QR code below:

Product Identification:

The product data plate is a permanently affixed label that contains the model, serial, barcode numbers, 
and refrigeration data of your Everest product. The tag is located on the rear or side of the unit exterior. 
Please retain this information for warranty-related purposes.

Warranty Registration

Registering your new appliance is important. In the unlikely event a safety notification or 
warranty service is required, we will have the means to contact you. Your completed appliance  
registration also verifies your ownership in the event of an insurance loss or theft.

Product Identification

The product data plate is a permanently affixed label that contains the model, serial, barcode numbers 

and refrigeration data of your Everest  product. This tag is located in the upper  left or right interior 

compartment for  models with doors, or the exterior left or right exterior housing for models  with 

drawers. Please retain this information for service-related purposes.

8.   Warranty Information

Register your Everest product within thirty (30) days of purchase to take full advantage of warranty 
services. Successful registration will expedite and help prevent complications in processing 
service requests.

Warranty Registration

You may register online at

  www.EVERESTref.com

 or send a completed warranty registration to:

MODEL : 

     

ESR1

COMPRESSOR : 

    

1/8 HP

REFRIGERANT : 

     

R290

* Use of other than specified refrigerant voids warranty

REFRIGERANT CHARGE : 

     

3.17 Oz

 

ELECTRICAL : 

     

 

115VX1Phx60Hz

TOTAL AMPS : 

     

 

3.27A (COMP RUN)

HIGH PRESSURE TEST : 

     

 

218PSIG. 

LOW PRESSURE TEST : 

     

38

PSIG. 

* Do not clean label with solvent

ESC47L

                                                         

 

 

                                                                                                                               

                                 

                                                       

                                               

                                                                                                                               

BTR1XXXXXXXX

                                                         

 

 

                                                                                                                               

                                 

                                               

                                                                                                                               

1.  Open the camera app.

2.  Point the camera at the QR code.

3.  Scan and launch the QR code.

Summary of Contents for ETF1
























Reviews: