40
GF0600055RevA06, October 006
Everest Lite Owner's Manual
Reassembly
1. Set rear base of wheelchair carefully on floor, as shown
at right. Assemble front base to rear base as shown.
2. Fold the front base up, as shown at right, and pull lever
to connect front base to rear base.
3. Install the battery pack, as shown at right.
4. Pull the seat rotation lever while installing the seat on
the base to lock it in place, as shown at right. Ensure
that seat is securely installed before continuing.
5. Connect the hand control connector to the cowl connec-
tor, as shown at right.
WARNING: Ensure that all components are installed as described before operating
wheelchair, and that all cables are away from the moving parts of the
wheelchair.
