12022-12023-INS-LAB-RevD18 6
3 OPERATION
GETTING STARTED
Please familiarize yourself with main components, identified in Rehab Shower Commode
illustration below.
armpad
removable
full-length arm
arm release button
crossbrace with serial number
padded commode seat
wheel lock
footrest
commode pail
footplate
front caster
24" rear wheel
tipping lever
sideframe
handrim
splash pail
back upholstery
(14
1
/
4
" low back)
backpost / push handle
handgrip
Rehab Shower Commode
shown with 14
1
/
4
" low back and 24" rear wheels
ASSEMBLING THE REHAB SHOWER COMMODE
Tools required: Phillips screwdriver
Open Rehab Shower Commode
Tilt Rehab Shower Commode slightly to one side and push down on seat rails.
Install the Back and Upholstery Assembly
1. Before installing the Back Assembly, you must first remove
both arms: Press down on the release button on front arm
socket and lift arm up and off. Repeat for other arm.
2. Remove the Back Assembly from the footrest box and
unfold it as shown at right.
3. Install the Back Assembly in the sideframe sockets as
shown.
4. Remove the washers and screws from the commode pail.
Install as shown. Use Phillips screwdriver to tighten.
5. Reinstall the arms: Position arm in front and rear sockets;
press down on front arm socket release button and slide
arm down into socket until it locks into place. Repeat for
other arm.
install back assembly
