Document No. 1112M001 Revision 1.6 Date: November 2012 51
►
Lubricate all bushes in bottom yoke with a thin film of oil or grease
before fitment.
►
Fit bottom yoke (11) to slip ring with cut-out facing downwards, slip
yoke into bottom yoke bracket and insert yoke anchor pin (12) and
2-off split pins (19). Secure the pin by bending one of the legs over
so that it cannot pull out again.
►
Applying a bit of thread glue onto the thread portion of the yoke
screw pins (13) before fitting the (2-off) screw pins through the yoke
(14) into the bottom slip ring (43).
Take care not to leave any thread glue on the bearing portion
of the screw pin (13) as this will prevent functional movement
of yoke.
►
Before fitting top yoke bracket, lubricate with oil or grease as above.
►
Slide top yoke (11) onto top yoke bracket (10), fit yoke anchor pin
(12) and (2-off) split pin (19)
►
Fit the 2-off yoke screw pins (13) to the top slip ring using thread
glue and heeding the same caution to only glue the thread portion.
13
12
19
14
43
