Document No. 1112M001 Revision 1.6 Date: November 2012 48
►
Offer the brake drum (2) onto the main
shaft. Slide brake drum over main shaft
with the flat face against the generator.
Tap the front of the drum while inserting
to slide over shaft.
►
Fit anchor pin (D) on the left side of the
generator with thread glue and tighten
using a 16mm spanner.
►
Fit 2 x Cable pulley pins (8) with thread
glue.
►
Fit 2 x cable pulleys (7) to generator.
►
Secure each pulley to the pulley pins
with a 12 mm washer SS (E) and a split
pin (21).
►
Secure the split pins by bending one of
the legs over.
D
8
7
E
21
2
