
DESIGNED TO PERFECTION
TROUBLESHOOTING
PROBLEM SOLUTION
Oven or hob not working
Check the electricity is turned on.
Check your fuses. If the fuse continues to blow, call Omega service.
Check the circuit breaker.
Ensure correct knob is positioned correctly.
Dry or clean ignition electrodes.
Make sure flame ports and ignition areas are clean and dry.
Check gas main supply is on.
Ensure cap/crown correctly fitted.
Replace or tighten light globes.
Lamp not coming on
Check the electricity is turned on, fuses are set and circuit breaker is
closed.
Bulb faulty, replace
Heating up problems
Oven not pre-heated: Pre-heat oven for 10 minutes.
Check oven door is closed properly.
Remove foil or trays from bottom of oven.
Change oven temperature.
Pre-heat oven before putting the food in to be cooked.
Unit smoking/odours
Turn the oven on high to remove protective oils.
Persistent gas smell: do not operate the cooker call omega service.
Condensation note: some
Condensation is normal and is
to be expected during cooking.
Reduce the amount of water used for cooking.
Leave the door open after cooking if food remains in cooker for
warming.
Oven shelves are tight
Remove oven shelf and re-insert.
Check side shelves are in the correct positions.
Cooling fan runs after ovens
turns off
This is normal and not a fault.
If you still have any problems with your product, please call your Authorised Service Centre.
TRANSPORTATION
Tape cardboard or paper onto the inside face of the glass as it will be prone to damage from the trays. Use
cardboard covers for the wire grill and trays in your oven. Also tape the oven’s covers to the side walls.
Always add protection around the burners and trivets.
If the original carton is unavailable, take measures to protect the external surfaces (glass and painted
surfaces) of oven against possible blows, as well as the above.
18