EVERDIGM EPG05, Operation & Maintenance Manual

Page: 34 / 38

- 34 -
8. Dismounting and Storing the grab
Dismount and store the grab according to following instructions :

When dismounting the hydraulic grab from the carrier, put the grab on the firm and flat ground after check
if there is no obstacle within the swing area of the carrier.

Also the grab of the grab must be kept completely open.

Take care of the safety against the grab
after dismounting so that it can‟t fall over.
 After turn stop valves to “OFF” position, disconnect hydraulic hoses from the stop valves.

Apply end caps and plugs to hoses and stop valves to prevent contamination.

The hydraulic grab recommended to be deposited for storage on a wooden support of sufficient size and
strength.

Also the grab of the grab must be kept completely open.

Collect any oil which runs out when the hydraulic hoses are disconnected and dispose of it correctly.