- 26 -
IMPORTANT!
Figure 23
DO NOT OPERATE WITH THE CARRIER
’S
HYDRAULIC CYLINDERS FULLY EXTENDED OR
RETRACTED.
Make sure that the piston of the hydraulic cylinders of the
carrier are at least 100 mm away from the stroke end before
operating grab. Failure to do so will cause damage to the
carrier
‟s hydraulic cylinders.
IMPORTANT!
Figure 24
DO NOT SUPPORT THE CARRIER WITH THE GRAB.
Never support the carrier
‟s weight with the grab -i.e. jack-up
with grab- to rotate the carrier
‟s undercarriage. This will
cause serious damage to the grab.
IMPORTANT!
Figure 25
NEVER USE AS A HAMMER.
Never attempt to use the grab as a hammer or ramming tool.
This will lead to the serious damage to the grab.
IMPORTANT!
Figure 26
START WORK AFTER REMOVING STEEL REBARS.
Steel rebar can severely damage cylinder and hoses. Thus,
remove steel rebar first before work.
Summary of Contents for EPG05
Page 36: ...36 Notes...
Page 37: ...37 Notes...
