Technical Information
• Turn the controller anti-clockwise (DOWN position) and hold
until the display reads “RESET”, then release the controller.
• Press and hold the “1” button while the display flashes
“RESET” and then switches to either:
10.1 ( = One Touch)
10.2 ( = Constant touch)
• Press the “1” button again until desired setting is reached.
Once the chosen setting is displayed, release the button and
wait about 5 seconds for the display to return to “RESET”.
• Finish the reset process by turning the controller
anti-clockwise and holding it until the desk lowers further,
slightly rises and stops.
The new touch settings are saved and the desk is ready to use.
Touch Settings
• Turn the controller anti-clockwise (DOWN position) and hold
until the display reads “RESET”, then release the controller.
• Press and hold the E Logo for about 5 seconds until
the minimum height is displayed.
• Turn the controller anti-clockwise or clockwise to decrease or
increase the height value respectively.
• Finish the reset process by turning the controller
anti-clockwise and holding it until the desk lowers further,
slightly rises and stops.
The new height value is saved and the desk is ready to use.
Manually Change Height Value
Troubleshooting / Health Coach Settings
Ensure that the desk it at its lowest height before attempting
any reset functions.
• Turn the controller anti-clockwise (DOWN position) and hold
until the display reads “RESET”, then release the controller.
• Press and hold the “2” button while the display flashes
“RESET” and then switches to either:
10.3 ( = CM)
10.4 ( = Inches)
• Press the “2” button again until desired setting is reached.
Once the chosen setting is displayed, release the button and
wait about 5 seconds for the display to return to “RESET”.
• Finish the reset process by turning the controller
anti-clockwise and holding it until the desk lowers further,
slightly rises and stops.
The new unit settings are saved and the desk is ready to use.
Changing Measurement Units (CM/Inch)
