• Connect cable exiting Leg (1) (attached to Frame End 3b) to Control
Box (6) via Cable Extender (9)
• Connect other Leg cable directly to the other side of Control Box
• Connect Power Cord (8) to Control Box
Connecting Cables To Control Box
6
S T E P S I X :
assembly
For installation of Health Coach Controller, refer to step 7b and skip this step.
• Secure Memory Controller (7) to worktop with Screws provided
• Connect Memory Controller cable to Cable Box (6)
Attaching Memory Controller
7
a
S T E P S E V E N ( a ) :
For installation of Memory Controller Only
• Place frame on table top
• Adjust frame to align with pre-drilled holes on table top
• Repeat for other side
• Insert and tighten two Pan Head Screws (M6x12mm) (14) to
attach frame to table top
• Repeat for the other side
Attaching Frame To Table Top
5
S T E P F I V E :
A. For Pre-Drilled Table Tops:
B. For Table Tops without
Pre-Drilled Holes:
12 14
-or-
• Lock the position of the center
rails using 8 Pan Head screws
(M6X10mm) (10)
• Double-check the frame is
properly positioned on the
underside of the table top
• Attach frame to underside of
table top using seven Wood
Screws (M5x20mm) (12) provided
1
1
6
6
9
9
6
7
7
