POWERLINE 11 series UPS – Instruction Manual
2011/07/22
www.ever.eu
18
WinPower SOFTWARE INSTALLATION
Installation on computers with Windows
Prior to beginning the installation of WinPower:
•
Uninstall the current version of WinPower, PowerSoft or any other control
software (in situations where the user is changing the battery back-up protecting
the computer),
•
If the battery back-up will communicate with the PC via a USB cable, this cable
should be disconnected from the computer. The software installer will prompt
the user to connect the communication cable at the appropriate time.
In order to install PowerSoft on a computer with Windows just run the software
installer and follow the instructions onscreen.
WARNING! When the software prompts for a serial number, please
key 511C1-01220-0100-478DF2A.
CONFIGURING THE BATTERY BACK-UP'S PARAMETERS
WinPower allows the user to change certain parameters of the battery back-up. To
make it possible the battery back-up must be connected to the computer with the
cable provided by the manufacturer and the user must be logged in with
Administrator privileges. The default administrator password is set to “Administrator”.
After logging in the user can change the password.
The screenshot below features the parameters that the user can modify in the
software.
•
Input frequency range for BYPASS,
•
Voltage range for BYPASS,
•
Panel keys’ functions and sound alarms settings,
•
Device behavior after turning off.
Summary of Contents for POWERLINE 11 series
Page 1: ......
