ModFactor User Guide
System Mode
44
[PGM XMT] – MIDI Program Change Transmit Enable (ON, OFF)
Press the Encoder to select. Turn Encoder to set MIDI Program Change transmit ON or OFF.
If ON, a MIDI Program change message is transmitted whenever a Footswitch is pressed for
Preset load.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[SYS ID] – MIDI SysEx ID (1-16)
Press the Encoder to select. Turn Encoder to choose the MIDI SysEx ID for Backup and Restore
of Presets and System settings.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[OUTPUT] – MIDI Transmit/Thru Select (XMT, THRU, THRU+C, MERGE)
Press the Encoder to select. Turn Encoder to select MIDI output mode. This may be one of the
following:
XMT to transmit TimeFactor MIDI data
THRU to pass incoming MIDI data to the MIDI outputs.
THRU+C to pass incoming MIDI data to the MIDI outputs, mixed with any MIDIclock
generated by the TimeFactor.
MERGE to pass incoming MIDI data to the MIDI outputs, mixed with any MIDI messages
generated by the TimeFactor.
If THRU is selected, the TimeFactor cannot generate any MIDI messages.
THRU+C and MERGE should NOT be used with heavy MIDI input.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[DUMP] – Dump Select (ALL, CURRENT, PRESETS, SYSTEM)
Press the Encoder to select. Turn Encoder to set what is being backed up via SysEx Dump or
Dump Request.
If ALL is selected, all saved Presets and System settings are dumped.
If CURRENT is selected, only the currently loaded effect is dumped.
If PRESETS is selected, all 40 Presets are dumped.
If SYSTEM is selected, all System Mode settings are dumped.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.