Eventide H7600 User Manual
78
If you pull the pitch wheel all the way down, you’ll get the screen shown below:
The bar graph reads
0.00
, the absolute minimum. Similarly, if you crank the pitch wheel
all the way up, the bar graph reads full maximum.
The next MIDI parameter we’ll discuss is
RANGE
. Range allows you to modulate a delay
time from 5 milliseconds to 25 milliseconds with a full rock of the foot pedal, or any
variation thereof.
With
RANGE
set to
+200
,
the external controller’s range corresponds to the full range of
the parameter’s values, which in this case is from -100 to +100 (different types of
parameters have different ranges). However, by adjusting the respective settings for
RANGE
, the parameter being modulated (
KNOB
in this case), and the external controller
doing the modulation, it is possible to "pin" the parameter being modulated at its
minimum or maximum values. This is illustrated in the following screens:
With the pitch wheel fully suppressed, the value of
KNOB
is
100
:
With the pitch wheel maximized, the value of
KNOB
is still 100. This isn’t good.
Now, we’ll adjust the value of the parameter being modulated to remedy this situation.
In this case, you’re going to manually change the value of
KNOB
to
0
while the pitch
wheel is idle (at
50%
):
Summary of Contents for H7600
Page 134: ...Eventide H7600 User Manual 134 ...
Page 138: ...Eventide H7600 User Manual 138 ...
Page 139: ...Eventide H7600 User Manual 139 ...
