manualshive.com logo in svg

Eventide H7600, Operating Manual

Share
Download
Eventide H7600 Operating Manual Download Page 103

 

Eventide H7600 User Manual 

 

103 

 

•

 

Then, to find an preset location for it, highlight the 

PROG CHNG

  parameter and 

rotate the knob until the value for the second line, 

PRESET

, reads 

none

 or 

empty

: 

  

•

 

Next, highlight the 

PRESET

 parameter and rotate the knob to choose the 

program you want to include in the group. (Here we’ve included the program 

4_ReverseTetra

 in 

Group7

:) 

 

•

 

 To remove a program from the user group, simply highlight the 

PRESET 

parameter and rotate the knob to select another program, or use the keypad 
to enter 0, which unloads the current preset value. 

Notes:   The preset line displays programs by search and sort parameters assigned on the 

PROGRAM

 area’s 

CRITERIA

 menu page.   

User group 1 is a factory group, with a cross-section of the H7600’s best programs. The 

contents of this group cannot be changed.  (A list of the presets it includes is found in the 

H7600 Presets Manual.) 

Other attributes of the 

USERGRP

 menu page include 

PROG CHNG

, the third parameter on the menu page, allows you to assign a MIDI 

program change value (0-127) to each program in a designated user group. This 
allows user groups to be used as MIDI maps, enabling their members to be loaded 
via MIDI program change messages. If you are not using the user group as a MIDI 
map

,

 think of this as a slot number, into which a program can be later inserted. 

Summary of Contents for H7600
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands