2
3
Assembling the ExerSaucer
Warnings - continued
Assembling the ExerSaucer
1.
Press Lock Guide
B
into Leg
A
, as shown, to create the Leg Assembly. Make
sure Lock Guide is facing in the correct direction (see illustration). Repeat for the
other three Leg Assemblies.
2.
Place end of Leg Assembly
A
into opening on bottom of Tray
D
. Make sure
Lock Guide
B
lines up with slot in bottom of Tray, as shown.
3.
Lift Tray
D
until opening in Tray lines up with hole in Lock Guide
B
. Screw Hand
Lock
C
into hole in Lock Guide. Tighten Hand Lock until it no longer turns.
DO NOT OVERTIGHTEN
. Repeat steps 2 and 3 for the other three Leg
Assemblies.
IMPORTANT:
When inserting Hand Locks, use the same opening in each Leg
Assembly, or the ExerSaucer will not be level.
WARNING
READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS!
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH!
•
DO NOT
dispose of batteries in fire, as batteries may explode or leak.
• The supply terminals are not to be short-circuited.
•
DO NOT
use rechargeable batteries.
•
DO NOT
recharge non-rechargeable batteries.
• Promptly remove exhausted batteries from the toy.
• Remove batteries before storing unit for a prolonged period of time.
•
DO NOT
allow unit to get wet.
• Dispose of used batteries properly.
STAGE 1
STAGE 1
A
B
D
C
B
Stage 1 is for use by children who are at least 4 months old
AND
can hold up their head and neck unassisted.
WARNING
A
B
A
B
Make sure Lock Guide is
facing in the correct direction.
