6
7
Remove the console, mattress pad and/or bassinet.
1. Rotate the loop
A
attached to the center of the floor
up to 90°.
2. Lift up on the loop until the feet
B
are drawn together,
as shown.
B
1
2
Find the center of one of the top rails
C
. Lift up and squeeze
hard on the fold lock release button inside the padded rail to
release the lock.
Make sure that
both sides of the rail
unlock properly, then
push the rail downward and fold completely. Repeat for the
remaining three top rails.
Note:
If the top rail will not fold completely, lift up on the loop
A
attached to the center of the floor and try again.
Gather the sides of the playard together.
Note:
If the sides do not easily fold up, repeat steps 1 and 2,
making sure all side rails are unlocked.
To disassemble the bassinet
D
, disconnect
the tubes
E
, as shown.
Note:
The tubes cannot be removed from the
bassinet.
4
3
FOLDING UP YOUR PLAYARD
Option A:
To securely attach the console
A
to the
playard, push each clip
B
onto the top of the
playard, as shown.
Option B:
To securely attach the console
A
to the playard,
push clips
B
through the openings
C
in the
changer and onto the top of the playard.
ATTACHING THE CONSOLE
Not available on all models.
A
A
B
B
C
B
A
C
A
B
D
E
To remove the changer
A
from the playard, unfasten the two
snaps
D
on the changer skirt. Pull up on each fastening clip
B
.
Raise the changer up and away from the playard.
B
3
A
D
SETTING UP THE CHANGER (continued)
2
1
90°
