background image

1

WE WANT YOU TO USE YOUR CONVERSION KIT FOR YOUR GRILL AS SAFELY AS POSSIBLE. 

THE PURPOSE OF THIS SAFETY ALERT SYMBOL 

  IS TO ATTRACT THE ATTENTION TO 

POSSIBLE HAZARDS AS THE GRILL IS CONVERTED AND USED AS A NATURAL GAS GRILL. 

WHEN YOU SEE THE SAFETY ALERT SYMBOL 

 

PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! 

 

 READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY

BEFORE CONVERTING AND OPERATING YOUR GRILL.

DANGER

IMPORTANT SAFETY WARNINGS

1.  Do not store or use gasoline or other fl ammable liquids or vapors in the vicinity of this or any other appliance.

2.  An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

WARNING

Installer Company or Service Name:  _______________________________________________

Technician Name:     ____________________________________Installation Date: _____________

 

Failure to follow the instructions as written, or installation by other than 

a trained professional, will void all manufacturer warranties. 

Model Number: ____________________________________

Serial Number:_____________________________________Date Purchased: ____________

IMPORTANT: FILL OUT PRODUCT RECORD INFORMATION BELOW.

IF YOU SMELL GAS:

1.  SHUT OFF GAS TO THE APPLIANCE.

2.  EXTINGUISH ANY OPEN FLAME.

3. OPEN 

LID.

4.  IF ODOR CONTINUES, KEEP AWAY FROM APPLIANCE AND IMMEDIATELY CALL YOUR GAS SUPPLIER OR 

YOUR FIRE DEPARTMENT.

WARNING

This conversion kit shall be installed by a qualified service agency in accordance 
with the manufacturer’s instructions and all applicable codes and requirements of the 
authority having jurisdiction.  If the information in these instructions is not followed 
exactly, a fire, explosion or production of carbon monoxide may result causing property 
damage, personal injury or loss of life.  The qualified service agency is responsible 
for the proper installation of this kit.  The installation is not proper and complete until 
the operation of the converted appliance is checked as specified in the manufacturer’s 
instructions supplied with the kit.

Summary of Contents for GAS2660AS















Reviews: