11
Changing the lights:
➢
Remove the oil cup and steel mesh.
➢
Use a screwdriver to remove the two screws at the bottom of the hood used to fix
the cover plate, and remove the six screws on the back of the hood used to fix the
cover plate. Then take off the cover plate.
➢
Use a tool or the hand to press the spring splinter of both sides of LED light to the
inside, until the light is pressed out. Then slightly pull the light connecting wire out,
and dismantle the terminal of the light connecting wire.
➢
Apply the reverse procedure to reinstall the light.
•
ILCOS D code for this lamp is:
DSR-1.5/65-S-64
– LED modules – round LED lamp
– Max wattage: 2
×
1.5W
– Voltage range: DC 12V
– Dimensions:
