6
3. After deciding the installation height, drill 4
φ
8
holes at the appropriate positions,
and fix the inside chimney bracket and the hanging screws on the wall. Pay
attention to ensure that the hood is level and the fixed position of the inside
chimney bracket is the highest place of inside chimney. The hanging screws
installed should leave for 3-5mm out of the wall to hang the hood. See pic 2.
4. Fix the outlet on the hood with 4pcs ST4*8mm screws. Then install the expansion
pipe onto the outlet and fix it with a cable tie. Hang the hood on the hanging screws.
See pic 3.
5. Fix the outside chimney bracket on the outside chimney with 2 pcs ST4*8mm
screws. Put the chimney on the cooker hood and lead the expansion pipe to
outside. Then fix the body with 2 pcs ST4*30mm safety screws. Note: The two
safety vents are positioned on the back housing, with a diameter of 6mm.See pic 4.
6. Adjust the height of the inside chimney to the position of the inside chimney bracket
and fix on it with 2pcs ST4*8mm screws, after adjusting the position, fix the body
with safety screws. See pic4 & 5.
