EVE FWD560+, Instruction And Installation Manual

Page: 18 / 23

IMPORTANT
: Don ’ t put your head or body under
DISPOSER UNIT COULD FALL DURING INSTALLATION
INSTALLATION INSTRUCTIONS (with the sink flange)
1. ATTACH TO SINK FLANGE
Line up the disposer under the sink flange
Guide the hopper projections into the
mount ring slots Turn the mount ring about
1 4 to the right so that the disposer is temporarily supported
2. LINE UP WITH OUTLET PIPE
Turn the mount ring and the disposer until the disposer
discharge elbow lines up with the outlet pipe
3. LOCK MOUNT RING
Turn the mount ring to the right until it locks up tight. Hopper
projections must be to the extreme left of the mounting slots If
the mount ring is hard to turn you may add a small amount of
petroleum jelly or liquid soap to the hopper projection Run water
and check for leaks
Hopper Projection in
“ Locked ” Position
Mounting Ring
Mount Ring Slot
HOPPER
PROJECTION
How to
lock the
mount
ring
Hopper Projection
“ Supported ”
Position
4. CHECK FOR LEAKS
Check the unit for leaks 24 hours after installation and first
operation
.