EVCO S.p.A.
Vcolor 338 S
| Installer manual ver. 1.2 | Code 144VC338SE124
page 30 of 52
12
"WEEKLY
PROGRAMMED
SWITCH-ON" FUNCTION
12.1
Preliminary notes
The “Weekly programmed switch-on” function allows to
programme up to a maximum of 9 weekly switch-ons of the
device and simultaneously start a recipe; see chapter 9 ““MY
RECIPES” FUNCTION”.
12.2
Setting
the
"weekly
programmed
switch-on"
function
Operate as follows to access the procedure:
1.
Ensure that at least one recipe is memorised, that
the device is on and that no other procedure is in
progress.
2.
Touch
.
Operate as follows to set the switch-on day:
3.
Touch
.
4.
Touch
or
within 15 s.
5.
Touch the middle of the display.
Operate as follows to set the switch-on time:
6.
Touch
.
7.
To set the time, touch
or
within 15 s.
8.
To set the minutes, touch the display in proximity
of the centre, then touch
or
within 15 s.
9.
Touch the middle of the display.
Operate as follows to set the recipe to start-up:
10.
Touch .
11.
Repeat the 3 points... 5. of paragraph 9.3
“Starting a recipe”.
Operate as follows to programme another switch-on:
12.
Touch
.
13.
Repeat the 3 points... 11.
Operate as follows to select a switch-on:
14.
Touch
or
.
Operate as follows to eliminate a switch-on:
15.
Select the switch-on.
16.
Touch
for 1 s.
Operate as follows to exit the procedure:
17.
Touch
.
Access to the setting procedure of the
“Weekly programmed switch-on” function.
Setting the switch-on time.
Exit from the setting procedure of the
“Weekly programmed switch-on” function.
