13
http://www.MicroDigitalEd.com/ARM/MSP432_books.htm
4.18 All on-board headers:
J1
LCD connector for a 16x2 LCD
J4 DC motor power source select, jumper on left side for onboard 5V, on right for
external power voltage, <12V, <1A.
J5
Two servo outputs, controlled by P2.7 and P2.6. Servos are supplied with 5V
J6
Two servo outputs, controlled by P2.5 and P5.5. Servos are supplied with 5V
J11 LCD backlight
J13 Analog sensor inputs and can be used for an IR distance sensor, such as GP2D12
or other analog or digital sensors
J14 LaunchPad main pin header 1
J19 LaunchPad main pin header 2
J23 LCD interface type select, serial or parallel
J24 Speaker source select, Timer or DAC
J25
2.2” QVGA TFT display interface
J27 CAN1/CAN2 select (not needed for MSP432 LaunchPad)
J31 Light, potentiometer and temperature enable jumpers
J34 FTDI connector
H1
0.96” OLED
H3 ESP8266
