EVBox Troniq 100, Installation And User Manual

Page: 50 / 84

Verifications Result Comments
Validate that the door locks are
correctly closed to guarantee
sealing against water ingress.
Confirm no evidence of
humidity or water ingress
inside the charger.
Confirm the door hinges are
correctly adjusted.
Verify visually the cables and
cabling inside the charging unit
are acceptable. No bare or
loose wires evident.
Confirm the presence of and
tightness of the GPU fixing
screws and the correct fixing /
tightening of the circuit
breakers.
Make sure the ventilation air
flow is correct and there is not
any obstruction at the
ventilation inputs and output
grill.
With all circuit breakers down,
check presence of voltage at
the main terminal block:
• Phase – Phase ~ 480 Vac
• Phase – Earth ~ 240 V
• Earth – Neutral 0 V
Validate the earth loop value (<
20 ohms condition dry)
Earth value:
........................ Ohm
Check the equipotential
connection between the metal
parts of the charger, including
door, with the main earthing
terminal block
EN
13. Appendix
46