EVBox Audi Wallbox Installation And User Manual Download Page 6

Page: 6 / 74

Software updates

Make sure that the wallbox always has the

latest software. Please note that a software

update requires the approval via the myAudi

app. Information about the latest software

updates can be found at https://www.elli.

eco/de/changelog/wallbox. The user is free

to install or reject the update. However, this

may impair the security as well as functiona-

lity of the wallbox. It will then potentially no

longer be possible to use new functions or

functionalities may be restricted.

Audi customer support

We are happy to assist with any questions

about the wallbox and this manual. Plea-

se contact us using one of the following

options.

Hotline: 00800 2834925

E-Mail: [email protected]

If an update is not agreed to, Elli and

Audi will not be liable for any product

defects in the wallbox that are caused by

the missing update.

Summary of Contents for Audi Wallbox











































































Search results

Summary of Contents for Audi Wallbox

Reviews:

Related manuals for Audi Wallbox

Brands by name

Popular brands

EVBox Audi Wallbox, Installation And User Manual

Search results

Summary of Contents for Audi Wallbox

Reviews:

Related manuals for Audi Wallbox

Brands by name

Popular brands