www.EVBIKE.cz
5 ERROR DIAGNOSTICS - TROUBLE SHOOTING
1
2
3
4
5
6
7
other
Communica
ti
on Error
Controller protec
ti
on
Three-phase power error
Ba
tt
ery low
Brake error
Turn error
Speed Hall error
Reserved
Check cable connec
ti
on
Check three-phase power line. If the problem persists,
consult your dealer, it is a defect in the motor.
Check three-phase power line connec
ti
on. If the problem
persists, consult your dealer, it is a defect in the motor.
Charge the ba
tt
ery. If the problem persists you must
check the ba
tt
ery.
Release the brake lever or perform check
of the switch func
ti
onality.
Then turn on and o
ff
the system again.
Speed Hall error. If the problem persists, consult your
dealer, it is a defect in the motor.
Error Code
Error descrip
ti
on
Handle
The product can be used in the rain, but should not be exposed to con
ti
nuous contact with water. If you are driving
in the rain never disconnect connectors and do not use LCD controller. Don’t leave the main unit exposed to direct
sunlight when not riding the bike. Store the product in a dry place with a temperature of 15-25 °C.
Keep product clean. Don’t use thinner, alcohol or benzene. Wash with clean water using a damp cloth.
Do not concentrate on meter while riding. Safety
fi
rst!
6 USAGE
NEVER MANIPULATE THE CHAIN AND CHAINSET IF
BATTERY IS CONNECTED. RISK OF SERIOUSLY INJURY!
BEFORE HANDLING TURN OFF LCD DISPLAY, DISCONNECT
BATTERY AND REMOVE IT OUT OF THE HOLDER.
CAUTION
