Warning:
don't change the following parameters if you are not sure
www.EVBIKE.cz
The loca
ti
on of speed display symbol
Wd
, this is the wheel diameter, wrong wheel diameter will cause
speed abnormal.
The loca
ti
on of speed display symbol
bU0
, this represent the ba
tt
ery parameter, wrong parameter can
cause ba
tt
ery indica
ti
on abnormal.
Set Kilometer / Mile speed units.
Set °C / °F temperature units.
Light sensi
ti
ve (bL0)
: 0 indicate automa
ti
c headlight/backlight OFF, 15 indicate automa
ti
c
headlight/backlight ON. 1 indicates the brightest on (auto turn on the backlight at bright environment),
5 indicates the darkest on (auto turn on the backlight at dark environment).
Backlight brightness (bL1):
Press bu
tt
on display symbol 1–5 to change the brightness of the backlight.
Buzzer(bEP):
0 indicates buzzer o
ff
, 1 indicates buzzer on.
Auto o
ff
delay
ti
me (OFf)
: Press the bu
tt
on display symbol 1 – 9, represent automa
ti
cally shutdown
delay
ti
me (minutes), default value is 5.
Power display (Pod):
0/1, represent whether to show the power indicate on LCD.
Maintain reminder (nnA)
: 0 represent maintain reminding o
ff
, 1 represent maintain reminding on.
We recommend leaving the value 0.
Wheel diameter (Wd)
: You can change this parameters as follows,
16/18/20/22/24/26/700C/28/29
.
This is represent the wheel diameter, in units of inches. Wrong value will cause incorrect speed measuring!
Ba
tt
ery parameter (bU0):
Press the bu
tt
on can change this parameters as follows,
24/36/UbE. This is represent the Ba
tt
ery rated voltage, UbE means user de
fi
ne voltage. Selec
ti
ng UbE value
a
ff
ects disconnec
ti
ng the ba
tt
ery when the voltage drops. Value UbE disables this protec
ti
on. Incorrect
se
tti
ng can damage the ba
tt
ery!
Se
tti
ng the speed limit:
This se
tti
ng is for security reasons under the code password. On the screen
labeled (
PSd
) input the key code "
1919
". When you enter is automa
ti
cally displayed menu
labeled (
SPL
). On this screen set value in the range of 10 - 99 km/h. For legal opera
ti
on on roads, the bike
motor is disconected a
ft
er reaching a speed of 25 km/h. So please never set higher value if the bike has
to be operated in accordance with the legisla
ti
on. Owner of the bike is responsible for proper opera
ti
on.
On the contrary, for safety reasons, it is possible, for example, set children limit reduced to 10 km/h.
•
•
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
