11
0800 422 274
NZ
Fan Only
Mode
The heater can be operated without heat output as a fan only.
• Press the ON/OFF [ ] button to start the fan. The Fan Indicator will
illuminate and the fan will start blowing air
without heat output.
Heating Modes
The heater can be operated on two power levels: 1200W or 2000W.
• In working condition, press the MODE button to toggle between the modes:
• Low heat output:
[ 1200W ] and
are illuminated on the display.
• High heat output:
[ 2000W ] and
are illuminated on the display.
• No heat output:
only
is illuminated on the display.
Swing (Oscillation) Mode
• In working condition, press the SWING (OSCIL) button to turn on oscillation
(swing). The Swing (Oscillation)
Indicator will illuminate and the heater will
start oscillation (70°).
• While the unit is oscillating, press the SWING (OSCIL) button to turn off
oscillation.
Timer Operation
The heater has 7.5-hour timer which you can set, in half-hourly steps, to
switch off the heater in 0.5 to 7.5 hours.
• In working condition, press the TIMER button to select the time period you
want it to remain on until it switches itself off automatically. With every press
of the button the time will be increased by half an hour and the display will
change accordingly.
• There are four Timer Indicators: 0:30, 1:00, 2:00, 4:00. For example:
* 0:30 illuminated indicates the timer will shut off after 30 minutes.
* 0:30 and 2:00 illuminated indicates it will shut off after 2.5 hours.
* 0:30, 1:00, 2:00, 4:00 illuminated indicates it will shut off after 7.5 hours.
NOTE:
Pressing the button once more after the display shows 7.5 hours will
reset the heater to continuous operation.
• Once the timer has been set, it will count down the hours in half-hourly
steps and show the remaining operating time on the display.
Switching Off
• In working condition, press the ON/OFF [
] button to stop the heater.
The fan will continue to run for 30–60 seconds before switching off.
Operating Instructions (Cont.)
