EVA Stampaggi HYDRO CURVED FRONT 20 KW, Instruction Manual

Page: 8 / 47

7
01. PRODUCT SAFETY

Do not use the appliance as waste incinerator or for any other purpose other than the intended one.

Do not use liquid fuels.

Do not modify the appliance without prior authorisation.

Use only original spare parts recommended by the manufacturer.

Make sure that the stove is transported in compliance with safety regulations. Avoid any improper transfers or knocks
that may damage the ceramics or the structure.

The metal structure is coated using high temperature paints. When using the appliance for the first few times,
unpleasant odours may be given off due to the paint of the metal parts that is drying: this is in no way dang erous and
in such case, simply ventilate the premises. After the first heating cycles, the paint will reach its maximum adhesion and
all its chemical and physical features.

The reload the hopper, simply open the access lid and pour in the pellets, also dur ing normal operation, making sure
that no pellets fall out of it. Always refuel the hopper before leaving the operating stove unattended for long periods of
time.

Whenever the hopper and the Auger tube get completely empty, the appliance will be automatica lly switched off. It
may take two separate ignitions to resume operation at ideal working conditions since the Auger tube is very long.

ATTENTION! If the stove is not properly installed, power outages may result in fume spillages. Under specific
circumstances, an uninterrupted power supply unit must be installed.

ATTENTION! Being a heating appliance, some parts of the stove can become extremely hot. We therefore recommend
paying special attention during operation.
WHEN THE STOVE IS WORKING:
o
do not open the door;
o
do not touch the door glass since it becomes extremely hot;
o
keep children away from it;
o
do not touch the fume outlet;
o
do not pour any liquid inside the firebox;
o
do not perform any maintenance operations if the stove is not cold;
o
only qualified technicians are allowed to perform any operation;
o
follow all the instructions contained herein.
Anti-explosion
Some products are fitted with a safety device to prevent explosion. Before switching on the product or, in any case, after an y
cleaning operation, make sure that the device is correctly positioned in its seat. The device is located on the firebox door upper
edge.