EVA Stampaggi HYDRO CURVED FRONT 20 KW, Instruction Manual

Page: 6 / 47

01. PRODUCT SAFETY
5
01.1 SAFETY WARNINGS
The stoves were built in compliance according to standard EN13240 (wood stoves), EN 14785 (pellet stoves) and EN 12815 (kitchens
and wood-burning stoves) using high quality and non-polluting materials. To make better use of your stove it is advisable to follow
the instructions in this booklet.
Read this manual carefully before use or any maintenance operation.
Eva Stampaggi aims to provide as much information as possible to ensure safer use and to avoid damage to persons, property or
parts of the stove itself.
Each stove is subjected to internal testing before shipment and as such residues inside the appliance may be found.
RETAIN THIS MANUAL FOR FUTURE REFERENCE.
FOR ANY REQUIREMENT OR CLARIFICATION PLEASE CONTACT
THE AUTHORISED RETAILER

Installation and connection must be carried out by qualified staff in compliance with local regulations, national and
European standards (UNI 10683) and with the annexed installation instructions. Furthermore, these operations must be
performed by personnel who are authorised and professionally trained for the task in question.

The combustion of waste, especially of plastic materials, damages the stove and the vent pipe. Moreover, it is forbidden by
the law against the emission of harmful substances.

Do not use alcohol, petrol or other highly inflammable liquids to light the fire or poke it during operation.

Do not introduce into the stove an amount of fuel greater than that recommended in this booklet.

Do not modify the product.

It is forbidden to use the appliance with the door open or the glass broken.

Do not use the appliance as, for example, a clothes drying rack, a bearing surface or step etc.

Do not install the stove in bedrooms or bathrooms.
The pellets to be used are the following:
The pellet stoves operate exclusively with pellets made from various types of legislative-compliant wood.
DIN plus 51731 or EN plus 14961-2 A1 or PEFC/04-31-0220 or ONORM M7135 or having the following characteristics:
Min calorific value 4.8 kWh/kg (4180 kcal/kg)
Density 630-700 kg/m3
Maximum humidity 10% of the weight
Diameter: 6 ±0.5 mm
Percentage ash: max 1% of the weight
Length: min 6 mm- max 30 mm
Composition: 100% untreated wood from the industry of wood or post-consumption without the addition of binders, bark-free
and compliant with current regulations.