08.2 EMERGENCY CONSOLE
The emergency console is used when the remote control does not work or in case of loss of the latter.
Button P1 – ON/OF:
Keeping this button pressed, the stove will switch on or off according to the last settings recorded by the remote control.
Button P2 – heat output increase / decrease:
With this button it is possible to select the stove heat output manually.
08.3 REMOTE CONTROL ASSOCIATION
First ignition and association of the radio remote control to the stove: it is necessary to interface the radio remote control to the emergency display. There are 2
possibilities:
1) With the board off, press the two remote control keys (ok+on-off) until the radio id menu appears. At this point press the “-“ key and the word "NEW"
appears. Press the OK” key and select the desired channel number (“+” and “-“ keys). Turn on the board and press the "OK" key on the remote control
to confirm.
2) With the board on, press the two keys of the remote control (ok+on-off) until the radio id menu appears. At this point, press the "-" key and the word
"NEW" appears. Press the OK” key and select the desired channel number (“+” and “-“ keys). Press the two buttons on the emergency console until all
the LEDs flash. At this point, press "OK" on the remote control to confirm.
08.4 MENU
Press the P4 button to access the menu.
It includes several items and levels to access settings and control board programming.
USER MENU
The table below briefly describes the menu structure, focusing in particular on the functions available to users.
OPERATING MODE menu
In this menu it is possible to choose the operation of our stove. There are 3 operating modes:
•
PWR (POWER):
operation based on the storage temperature with the air fan off: the stove adjusts its power to bring the storage to the pre-set temperature (the
power of the stove cannot be adjusted. It is possible to increase or decrease the storage temperature by a pre-set percentage by pressing the P2 button.
•
CLAS (CLASSIC):
operation based on the ambient temperature with the air fan on: the stove adjusts its power based on the ambient temperature. Ventilation can
be activated or deactivated by pressing the P5 key.
•
HIBR (HYBRID, di default):
operation based on room temperature but in power mode. If the ambient temperature is not satisfied when the storage temperature
is reached, the air fan is also activated. Once the set temperature is reached, the stove switches off.
DISPLAY ADJUSTMENT menu
In this menu it is possible to adjust the settings of the remote control display. You will find:
BACKLIGHT ON: duration of the remote control lighting
POWER ON: duration of the display on
BRIGHTNESS: on or off
CONTRAST: to adjust the display contrast
KEY TONES: to deactivate or activate the remote control keys beep
13
