4. OPERATION
FUNCTIONS
1. Bar Voltage Display
It displays the voltage as a graph up to 35 bars (22.5~26V).
2. Digital Voltage Meter
It displays the voltage digitally up to 20~30V.
3. Time Clock
Displays the Current Time.
4.3 HOW TO OPERATE YOUR SCOOTER
■
Key Switch
The
SPORTRIDER
has a main ignition key switch.
The main key switch has two position
(ON) : Power is supplied to the SPORTRIDER. The status/error indicator comes on and stays on
after the controller has checked all systems and the scooter is ready to be ridden.
(OFF) : The
SPORTRIDER
cannot be operated and the electromagnetic brake is applied (ON).
■
Operating Lever and Manual Hand Brake
To start riding, squeeze the throttle lever gently. The controller will release the electromagnetic
brake and the scooter will begin moving.
The speed is directly proportional to the deflection of the throttle lever . The higher the deflection,
the higher the speed.
To stop, simply release the throttle lever. The
SPORTRIDER
will slow down gradually and the
electromagnetic brake will apply at the end of the stop cycle.
Additionally, emergency braking is possible by using the manual handbrake. Squeeze the
handbrake lever (like in a bicycle) for any emergency stop. The lever also has a push-down lock if
you were in the need to keep it depressed.
To release the emergency brake lock, squeeze the handbrake lever again and this will release its
lock.
■
Parking
After stopping, turn the main key to the OFF position and remove the key. The lights will turn
OFF. The electromagnetic brake is engaged (ON) and will disable drive until the unit is powered
up again and the throttle lever is depressed.
The handbrake lever can be locked by pushing the lock button while squeezing the handbrake
lever. To release the handbrake – squeeze the lever gently until the lock pops up.
Lock Button
Handbrake Lever
User Manual (Page 15 of 31)
15 of 28
