4
The lightning flash with an arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence of
uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this unit near water.
6.
Do not clean by spraying liquid directly onto
unit.
7.
Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
8.
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
unit that produce heat.
9.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type plug
has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10.
Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the unit.
11.
Unplug this unit during lightning
storms or when unused for long periods of
time.
12.
Refer all servicing to qualified service
personnel. Servicing is required when the
unit has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the unit, the
unit has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
Warning!
To reduce the risk of fire or electric shock,
do not expose this unit to rain or
moisture.
Use line cord supplied with the product.
Be advised that different operating voltages
require the use of different types of line
cord and attachment plugs. The unit was
shipped with the requested plug. If the
installation requirements change please
contact us for the correct plug.
This equipment should be installed near the
socket outlet and disconnection of the device
should be easily accessible.
Do not install in a confined space.
Do not open the unit - risk of electric shock
inside.
Caution:
You are cautioned that any change or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
Service
There are no user-serviceable parts inside.
All service must be performed by qualified
personnel.
Voltage
100-240 v ac 50-60hz 1 amp Max (auto
select)
Pressure
75 psi max to inlet
Temp
0 to 40°C <> 10 to 85% RH (no
condensation)
