Step 1:
Select installation site following 4 rules:
- Clear line sf sight
- Suitable surface for fixing mast
- Cable route and distance (30m)
- Safety of installation
Step 2:
To check Line of sight open the
Android/iOS smartphone App 36 Broadband
Pointer
Step 3:
Click on ‘Find Satellite’ and move the
phone until the red circle becomes green (fig. 3)
Step 4:
Make sure no obstruction appears within
the
green circle
(clear line of sight as fig. 3)
Step 5:
Identify on the Contract Form the
Polarization value (RHCP or LHCP)
Step 6:
Assemble the Transceiver according to
fig. 2.2
if LHCP or
fig. 2.3
if RHCP
Step 7:
Assemble the Antenna: Reflector, Az/El
Head, Arm, Brakets
Step 8:
Install the antenna on the mast and
check with a lever if the mast is vertical
Step 9:
Fix the Transceiver on the antenna arm
Step 10:
Connect first Coaxial cable between
modem
(RF IN)
and Transceiver
(RX)
and
connect
second Coaxial cable between modem
(RF OUT)
and Transceiver
(TX)
as fig. 4 (make sure the side
of the cables with the compression connectors
are set outside on the Transceiver). Tighten all 4
connectors with 11mm spanner
Step 11:
Connect ground cable to the bracket
Part 2: System Assembly
Part 1: Site Selection
Figure 3
Figure 4
TX
RX
Cable
TX
Cable
RX
IN
OUT
INSTALLATION STEPS
