EUTECH INSTRUMENTS CyberScan pH 5000 Instruction Manual Download Page 73

Page: 73 / 150

Instruction Manual

CyberScan pH5500/ 5000

This function will allow you to choose what information you would like
to be displayed on the pH Measure screen, particularly the
information contained in the data box at the bottom of that screen.

To Set Display Configuration

1. Access the Set Display Configuration screen from the pH (mV,

Ion) Setup screen. The current display configuration is displayed
on the screen.

2. Use

the

arrow keys

to highlight the Display Configuration criteria

you want to modify.

3. Touch

OFF

to change the status of the criteria

4. Touch

save

to save the entire group of display configuration

criteria and return to the pH (mV, Ion) Setup screen.

Touch

exit

to return to the pH (mV, Ion) Setup screen, without

making any changes.

January 15, 2002 11:11am

ID#

00000

auto buffer

ATC

25.0°C

slope

100%

0000.0

pH Display Configuration

Summary of Contents for CyberScan pH 5000























































































































































Search results

Summary of Contents for CyberScan pH 5000

Reviews:

EUTECH INSTRUMENTS CyberScan pH 5000, Instruction Manual, Page: 73 / 150

Search results

Summary of Contents for CyberScan pH 5000

Reviews: