manualshive.com logo in svg

EUTECH INSTRUMENTS CyberScan pH 5000, Instruction Manual, Page: 57 / 150

Share
Download
EUTECH INSTRUMENTS CyberScan pH 5000 Instruction Manual Download Page 57

Instruction Manual  

 

            CyberScan pH5500/ 5000 

 

This setup screen allows you to determine how quickly the meter will 
respond to electrode drift. There are 3 speed settings: fast, medium 
and slow. 
 

 
To set pH Stability Criteria 

 
1.  Access the Set pH Stability Criteria screen from the pH (Ion) 

Setup screen. The current stability criteria are displayed on the 
screen. 

 

2. Use 

the 

arrow keys

 to highlight the desired stability criteria. 

 
3. Touch 

enter 

to accept the stability criteria and return to the pH 

(Ion) Setup screen and return to the pH Setup screen. 

 

OR 
 

Touch 

exit

 to return to the pH (Ion) Setup screen, without making 

any changes. 

 

 

 

Stability criteria are more stringent at the slower setting. Therefore, if 
the highest precision is required, then a slow setting would be 
desired. The default setting is the medium speed and this would be 
adequate for the majority of applications. 

 

 

52

Summary of Contents for CyberScan pH 5000























































































































































Reviews:

No comments