EUTECH INSTRUMENTS CyberScan pH 5000 Instruction Manual Download Page 119

Page: 119 / 150

Instruction Manual

CyberScan pH5500/ 5000

To take a measurement

1. Immerse the ion selective electrode in a known volume of the

sample solution.

2. Stir the sample.

3. Touch

to take the first mV reading of sample. Wait for the

reading to stabilize (

STABLE

will appear).

Touch

to accept the current reading.

4. Add a known volume of standard solution to the sample.

5. Touch

to take the second mV reading of sample. Wait for the

reading to stabilize (

STABLE

will appear).

Touch

to accept the current reading.

6. Use the keypad to enter the sample volume.

7. Touch

enter

to accept the value.

8. Use the keypad to enter the standard volume.

9. Touch

enter

to accept the value.

10. Use the keypad to enter the concentration of the standard

solution added to the sample.

11. Touch

enter

to accept the value.

12. Use the keypad to enter the concentration of the standard

solution added to the sample

13. Touch

enter

to accept the value. Your Known Addition result is

now displayed.

14. Touch

print

to send the data to memory if sample ID# has been

assigned or to print the data on the screen.

Touch

to return to the Measure screen for a new

measurement.

114

Summary of Contents for CyberScan pH 5000























































































































































Search results

Summary of Contents for CyberScan pH 5000

Reviews:

EUTECH INSTRUMENTS CyberScan pH 5000, Instruction Manual, Page: 119 / 150

Search results

Summary of Contents for CyberScan pH 5000

Reviews: