Setting the local device Network ID
If the Device Selection is selected to local
device
, enter the network ID in Network ID filed
then click Save changes button to sets the entered Network ID.
If the Device Selection is selected to remote
device
, enter the network ID in Network ID filed
and enter the remote device access key in DAK password field then
click Save changes button to sets the entered Network ID. (The
DAK password is show on each PLC’s device label).
Reset to Default
Press the Reset to Default button to restore the factory default
network id setting for “HomePlugAV”.
Upgrade
Device Selection
Select the device form drop down list will be configure.
Reboot Device
Press the
Reboot Device
button to reset the node, which will restore the initial factory
configuration.
11
