1.4
System Requirements
Installation of the UOW2000 Series Outdoor Wireless Access Point/Client
Bridge requires the following:
1.
A Windows-based PC/AT compatible computer
（
PC system
requirement
：better than PIII 800 or other 100% compatible equipment , OS：
windows 2000/XP ）
or Ethernet data device with an available
RJ-45 Ethernet port to run the configuration program or with
TCP/IP connection to the Ethernet network.
2.
A 10/100Base-T Ethernet RJ-45 Ethernet cable is connected to
Ethernet network.
3.
An AC power outlet (100~240V, 50~60Hz) supplies the power.
1.5
Inline Power Injector (PoE)
The UOW2000 Series is equipped with an Inline Power Injector module.
The Inline Power Injector (PoE) delivers both data and power to
UOW2000 Series unit via a signal Ethernet cable, and gives the following
benefits to improve the performance vs. installation cost ratio.
¾
This works great in areas where you may not have power , like
house roof.
¾
This also allows you to place the UOW2000 Series unit closer to
the antenna, to make installation easier more thus reducing
signal loss over antenna cabling.
¾
Ethernet signal travels well over CAT 5 cable but 2.4GHz signal
doesn't do as well over antenna cabling.
¾
Ethernet cabling is much cheaper than Antenna cabling.
5
