Figure 4-7
Admin Password
Enter a password for the user "admin", who will have full access to
the Web-based management interface.
User Password
Enter a password for the user "user", who will have read-only
access to the Web-based management interface.
Access Point Name
The name of the Access Point can be changed here.
Admin Idle Timeout
The amount of time before the administration session (either
remote or local) is closed when there is no activity.
Save Configuration
This option allows you to save the Access Point's configuration to a
file on your computer. Be sure to save the configuration before
performing a firmware upgrade.
Restore Configuration from File
Use this option to load previously saved Access Point configuration
settings.
Save Configuration To Wireless Network Setup Wizard
If your PC's operating system is Windows XP Service Pack 2 (SP2)
or later and you are using Windows Internet Explorer (IE) as your
browser, you can use this option to save key parts of the Access
Point's current wireless security settings to your PC with Windows
Connect Now (WCN) technology. The settings will then be
available to propagate to other wireless devices.
WCN ActiveX Control
The WCN ActiveX Control provides the necessary WCN link
between the Access Point and your PC via the browser. The
browser will attempt to download the WCN ActiveX Control, if it is
not already available on your PC. For this action to succeed, the
WAN connection must be established, and the browser's internet
security setting must be Medium or lower (select Tools -> Internet
Options -> Security -> Custom Level -> Medium).
Click the
Save to Windows Connect Now
button, and the WCN
technology will capture the wireless network settings from your
Access Point and save them on your PC.
40
