COM Port Setup
-
COM Status:
Set COM port for PTZ, RS-232 or RS-485.
-
PTZ ID:
The number must match the ID address set by the dome camera.
-
Baud Rate:
Set the value if necessary.
-
Data Bit:
Set the value if necessary.
-
Stop Bit:
Set the value if necessary.
-
Parity:
Set the value if necessary.
-
Flow Cont
et the value if necessary.
PTZ Protocol / Status:
Display the PTZ protocol and the status of the connected dome camera.
System Commands (Available for Administrator only)
rol:
S
-
-
Apply:
Confirm the settings.
-
Factory Default:
Restore the settings to the factory defaults.
Reboot:
Restart the device.
-
37
3
Summary of Contents for UNC7702
Page 5: ...Chapter 2 Physical Images UNC7702 Network Camera 4 ...
Page 18: ...17 1 Playback Screen Controller s View ...
Page 46: ...45 4 8 Log Log List List ...
Page 55: ...54 5 ...
