Eusso UNC 7800 series User Manual Download Page 6

Page: 6 / 54

Chapter 3

Installation

1. Installation

Preview

There are 3 mains steps required to perform a successful installation:

Hardware installation

Software installation

Network configuration

Hardware installation consists of connecting cables to the vandal dome including network, video, and

power cables.

Software installation consists of the installation of software that is necessary to properly view the video

from the vandal dome or to configure the vandal dome itself.

The software includes:

IP Installer -

A utility for locating devices and configuring network settings on a LAN.

Component Installer -

installs all ActiveX components used by devices for things such as video

display and configuration.

Adobe Flash Player -

necessary for displaying some components of the Web UI.

The following are not necessary, but may be used for added convenience:

Recording Software -

for displaying and recording up to 16 channels simultaneously. Both MPEG-4

and MJPEG devices are supported.

Note: the MPEG-4 device can only display and record up to 4 channels.

XVID -

A MPEG-4 codec. If no other MPEG-4 codec (i.e. DivX, 3ivX, ffdshow, etc.) are installed on

your computer, the Component installer will install this for you.

QuickTime or VLC -

though not necessary, this can be used for viewing the MPEG-4 stream

without a Web browser.

Network configuration consists of modifying the network settings for the vandal dome in order to

successfully connect to the device.

Summary of Contents for UNC 7800 series























































Search results

Summary of Contents for UNC 7800 series

Reviews:

Related manuals for UNC 7800 series

Brands by name

Popular brands

Eusso UNC 7800 series, User Manual

Search results

Summary of Contents for UNC 7800 series

Reviews:

Related manuals for UNC 7800 series

Brands by name

Popular brands