Instruction Manual MM850402 ed. 08b
26
“Control Panel \ Network and Dial-Up Connections”, right-clicking on the appropriate connection and selecting
“Disable” from the menu. The connection can be re-enabled after the correct driver installation. This it’s not
necessary if your computer runs Window™ XP SP2 if configured to ask before connecting to Windows Update.
Windows™ XP SP2 can have this parameter already set, and to verify this open the Control Panel, select “System”,
select the Hardware tab and click “Windows Update”. Please verify that this option is DISABLED.
•
Connect the instrument to a USB port of your computer. This will automatically run the “Windows Found New
Hardware Wizard”, if the adaptor is not automatically identified and installed on your system.
•
The following page will be displayed:
•
Select “No, not this time” to avoid the driver search in internet, then click “Next” to proceed with the installation
•
Select the second option: “Install from a list or a specific location (Advanced)”, then click “Next”
•
Select the option referring to the following page, flagging “Search for the best driver in these locations”. Press
“Browse” to select the file path.
