M1501 / KD1501
CONTROL PANEL
A. MODE
“AUTO” Mode : A Combination of Kneading and Air Massage for Feet
“MASSAGE” Mode : Kneading Massage for Soles
“AIR” Mode
: Full Air Massage for Feet
B. INTENSITY levels
C. HEAT Therapy
D. STOP
Key functions:
Button
Function
MODE
Press to turn ON with default “AUTO” mode of low intensity
Press again to turn on “MASSAGE” mode Press one more to turn
on “AIR” mode Press again to stop all massages
STOP
Press to stop the massage any time
INTENSITY
2 Levels of intensity: HIGH / LOW
(Applicable to “AUTO” and “AIR” modes only)
HEAT
Heat therapy of the soles
Auto Timer: 15 minutes. Power will turn Off automatically after 15 minutes to
prevent over heating.
Always unplug the AC power cord after use.
TROUBLE-SHOOTING
This page summarizes the most common problems you could encounter with the
product :
Problem
Possible Cause
Suggestion
The product
does not work
The product is not plugged in
properly.
The product has just session
and has
automatically switched to
standby mode.
You may have used the
product continuously for 30
minutes or more where the
over heat protection has
been activated.
Ensure the voltage on the
product corresponds to the
local mains voltage and then
plug in again.
If you want another session,
press the MODE button
again.
Unplug the product and let
it cool down for 60 minutes
before you use it again.
An excessive load has been
applied on the product.
Reduce the excessive load
and start again.
The product is
abnormally
warm
The product is likely to be
overused.
Unplug the product and let
it cool down before using
it again.
Noise can be
heard from
the product
Noise is made by the
mechanical parts of the
product.
This is normal and does not
mean that the product is
faulty.
