Eurotherm 584SV Series, Product Manual, Page: 146 / 255

909;##
3URJUDPPLQJ # <RXU # $SSOLFDWLRQ
8;7 69 # 6HULHV # )UHTXHQF\ # ,QYHUWHU
7(& # 237,21
This function block is used to configure the
inputs and outputs of the various Technology
Option boards that can be fitted.
The Technology Option board provides a
communications interface for external control
of the Inverter.
Refer to the appropriate Technology Manual
supplied with the option for further details.
TEC OPTION
FAULT [756] – NONE
VERSION [757] – 0000
OUTPUT 1 [758] – 0000
OUTPUT 2 [759] – 0000
NONE – [750] TYPE –
0 – [751] INPUT 1 –
0 – [752] INPUT 2 –
0 – [753] INPUT 3
–
0 – [754] INPUT 4 –
0 – [755] INPUT 5
–
00, # 0HQX # 0DS
4
SETUP PARAMETERS
5
FUNCTION BLOCKS
6
SERIAL LINKS
7
TEC OPTION
TEC OPTION TYPE
TEC OPTION IN 1
TEC OPTION IN 2
TEC OPTION IN 3
TEC OPTION IN 4
TEC OPTION IN 5
TEC OPTION FAULT
TEC OPTION VER
TEC OPTION OUT 1
TEC OPTION OUT 2
3DUDPHWHU # 'HVFULSWLRQV
TYPE Range: Enumerated - see below
Selects the type of Technology Option card.
Enumerated Value : Technology Option
3#=# 121(
4#=# 56 7;8
5#=# 352),%86 # '3
6#=# /,1.
7#=# '(9,&(1(7
8#=# &$123(1
9#=# 7<3( #9
:#=# 7<3( #:
INPUT 1 to INPUT 5 Range: -32768 to 32767
The use of these input parameters depends on the type of Technology Option card fitted.
Refer to the Technology Manual.
FAULT Range: Enumerated - see below
The fault state of the Technology Option card.
Enumerated Value : Fault State
3#=# 121(
4#=# 3$5$0(7(5
5#=# 7<3( # 0,60$7&+
6#=# 6(/) # 7(67
7#=# +$5':$5(
8#=# 0,66,1*
VERSION Range: 0000 to FFFF
The version of the Technology Option card. If no option is fitted then the version is reset to zero.
OUTPUT 1 and OUTPUT 2 Range: 0000 to FFFF
The use of these output parameters depends on the Type of Technology Option card fitted.
Refer to the Technology Manual.